Couldn't Connect to Server FIX
Welcome to the Rapid Hosting Troubleshooting Guide for Resolving the "Unable to Connect to Your FiveM Server" Issue.
Step 1: Verify TxAdmin Settings
To begin, ensure that you have TxAdmin enabled with Onesync Legacy activated. Access these settings in TxAdmin under Settings > FXServer.
If you continue to experience the issue, please proceed to Step 2:
Step 2: Check Server.cfg Configuration
Navigate to your server.cfg file and search for the following lines:
endpoint_add_tcp "0.0.0.0:PORTHERE"
endpoint_add_udp "0.0.0.0:PORTHERE"
If the port numbers specified here do not match your primary allocation port (e.g., 30120 and 30121), it may result in a connection error. Adjust the port numbers to match the primary allocation port, and then restart your server via the Console.
This Troubleshooting Guide has been provided by Tanek J, CEO of Rapid Hosting (2023).
Step 1: Verify TxAdmin Settings
To begin, ensure that you have TxAdmin enabled with Onesync Legacy activated. Access these settings in TxAdmin under Settings > FXServer.
If you continue to experience the issue, please proceed to Step 2:
Step 2: Check Server.cfg Configuration
Navigate to your server.cfg file and search for the following lines:
endpoint_add_tcp "0.0.0.0:PORTHERE"
endpoint_add_udp "0.0.0.0:PORTHERE"
If the port numbers specified here do not match your primary allocation port (e.g., 30120 and 30121), it may result in a connection error. Adjust the port numbers to match the primary allocation port, and then restart your server via the Console.
This Troubleshooting Guide has been provided by Tanek J, CEO of Rapid Hosting (2023).
Updated on: 27/10/2023
Thank you!